How to Stop Stains Bleeding Through Paint
Quick answer: Stains keep bleeding through paint because water-based latex paint cannot block them, no matter how many coats you add. Water rings, smoke and…
Category
Tips, guides, and advice for painting contractors on pricing, estimating, and growing your business.
Quick answer: Stains keep bleeding through paint because water-based latex paint cannot block them, no matter how many coats you add. Water rings, smoke and…
Quick answer: Touch-ups show as spots, halos, or a different sheen when the patch does not match the original in paint, sheen, age, or applicator.…
Quick answer: Tacky paint usually means the coat could not dry or cure, almost always because of high humidity, cold temperatures, poor airflow, coats applied…
Quick answer: Paint fails to cover when there are too few coats, no primer over a big color change or stain, the paint is over-thinned…
Quick answer: Paint bleeds under tape when the tape edge is not fully sealed, so paint seeps beneath it and dries as a fuzzy, jagged…
Quick answer: Drips and runs happen when too much paint is loaded onto one spot and gravity pulls it down before it sets. If the…
Quick answer: Blotchy paint, with patchy color, uneven sheen, and shiny or dull spots known as flashing, usually means the wall absorbed paint unevenly. The…
Quick answer: Cracking paint, including flaking and the scaly pattern called alligatoring, comes from coats applied too thin, not enough dry time, low quality paint,…
Quick answer: Bubbling paint, also called blistering, happens when the paint film lifts off the surface into pockets. The usual causes are painting in heat…
Quick answer: Peeling paint almost always traces back to moisture, a dirty or glossy surface, or paint applied without primer. To fix it, scrape off…